วิธีถ่ายเอกสาร canon mp287

หมายเหตุ วิธีการใช้งานผมเขียนแต่ที่จำเป็นนะครับหากต้องการทราบเรื่องอะไรหรือการใช้งานในส่วนใดพิมพ์ความต้องการไว้ท้ายบนความได้เลยครับ ผมจะหามาลงให้

Canon MP287 Printer Manual
** To install the driver, insert the disc before doing any steps until there is a screen to plug in the USB cable, if plugged in first, the computer may not be able to see **

Operation of the buttons on the device
1.On-off button
2. Display - Select the number of copies (Copy).
3.Display light
-Alarm the printer is faulty, cannot print. If you come up with this one, you need to look at the Error code on the display screen to see what the device says.
-Color ink, color ink cartridge status light
-Black ink, black ink cartridge status light
4. Select the paper type and size.
-A4 Plain paper A4 size plain paper
-A4 Photo paper, A4 glossy paper
-4x6 photo paper 4x6 glossy paper
5. Maintenance tools (When pressed, a letter will appear on the display)
When you want to use any function, press the color or black Copy button once.
- Press 1 time up to the A test head.
- Press 2 times up H to wash or clean the print head.
- Press 3 times up the Y body to wash or clean the primer thoroughly.
- Press 4 times up u letter to print head alignment (half U letter)
- Press 5 times up the U shape to align the print head (full U shape).
- Press 6 times up the L letter to print the print head position.
- Press 7 times up the body b to clean the plate below.
- Press 8 times up, J, cleans, rolls
- Press 9 times up d to set silent mode
6. Make a copy position to fit the sheet.
7. Scan
8. Make black and color copies.
9.Stop / Reser Cancel button

 Error Code is Displayed on LED
The printer has a problem indicator, the user can look at the code on the display to know what printer problem.
1. E02 There is a problem with the paper system. Load paper and press the color or black copy button.
2.E03 There is a problem in the paper slot. Check the paper path to see if there is anything jammed, then turn off the power and turn it back on.
3.E04, E05 The machine cannot recognize the cartridge. Take out the ink cartridge, clean the pattern and reinsert it.
4.E07 The cartridge is not installed. Open the scan lid to check if there is an ink cartridge.
5.E08 ink absorber full Must use the program from the center.
6.E13 The machine has run out of ink, press and hold the Stop / Reset button for about 30 seconds.
7.E14 ink cartridge cannot be recognized Remove the ink cartridge and clean the pattern.
8.E15 The machine cannot recognize the cartridge. Remove the ink cartridge and clean the pattern.
9.E16 Ink machine runs out, press Stop / Reset button for about 30 seconds.
10.E30 There is a problem with setting the paper size.
11.E31 There is a problem with USB connection, please check USB.
12.E50 Scanning in the print head alignment failed, press the Stop / Reset button to lift.

quit
13.P02 Machine malfunctions. Check for foreign objects in the machine and remove them.
14.P10 Printer error, try turning the power off and back on, if not, should be repaired.

How to fix when paper is jammed
- Always remove the power cord. Always pull the paper out from the machine side. But if you can't remove it from the front of the machine, you can pull it out from the back, but be careful if you can't pull it out, don't force it, it may cause damage to the parts

For use with the driver, see the page. Driver settings

Note how to use I write but it is necessary. If you want to know what or how to use it in any part, you can type your needs at the end of the text. I will find them

How to copy machine Canon, princess, MP287 MP280 MP258
the copier. The usual procedure as well as photocopying

1. Open front down to accommodate the paper print
2.Open the lid on the scanner. In order to put the workpiece to copy > close the lid to the next stage
3. Taking black and white hit Black bottom right corner on the part of the menu. Start
4. Color copy, press Color bottom right corner on the part of the menu Start
.If you want more than 1, press mark (upper right corner next to the screen Led)

the Scan button is to generate electricity the job file stored in the computer.
when we press this button on the machine. If there is a connection with line USB computer anyway
.The screen will show Pop Up, allow us to Crop and store the images or documents in My Document
or My Picture.

การแปล กรุณารอสักครู่..

Canon ถ่ายเอกสารยังไง

เครื่องปริ้นถ่ายเอกสารยังไง

เครื่องปริ้นถ่ายเอกสารได้ไหม

ถ่ายเอกสารหน้าหลังทำยังไง