แก้ปัญหาแท้งค์ Canon Mp287 EP1 มีอากาศในสายแท้งค์ ก่อนอื่นต้องแจ้งก่อนว่าหากการพิมพ์ของเราปกติไม่ต้องทำการแก้ไขใดๆถึงแม้จะมีอากาศอยู่บ้างก็ให้ใช้งานต่อไปเพราะอาจจะทำให้เกิดปัญหาได้หากแก้ผิดวิธี จากรูปด้านบนจะมีอากาศอยู่บริเวณตลับโดยมีหมึกไหลย้อนกลับไม่มากซึ่งอาจจะเป็นปกติเพราะตลับหมึกอาจจะมีอากาศอยู่ภายในตลับหมึกทำให้เมื่อเราไม่ใช่งานอาจจะมีย้อนกลับมาบ้างเมื่อเราพิมพ์หรือสั่งล้างระบบแท้งค์ก็จะดึงหมึกเข้ามาเอง จากรูปต้องเช็คดูว่าจุกอุดช่องอากาศของแท้งค์อุดอยู่หรือไม่ หากอุดอยู่ให้แกะออกหากเราไม่แกะออกก็จะเกิดอากาศพิมพ์ไม่ออกหรืออาจจะออกในช่วงแรกและสีจะหายไป อาการสีไม่มีในสายหากหายไปทั้งสายอาจจะเกิดจากบูธที่เป็นที่เชื่อมระว่างสายและตลับหมึกรั่วอาการนี้ต้องเปลี่ยนใหม่โดยเมื่อเราล้างหัวพิมพ์หรือสั่งพิมพ์หมึกในสายจะถูกดึงเข้าไปยังตลับแต่เมื่อเราไม่ใช้จะไหลกลับมาแต่รระยะจะไกลกว่าเมื่อใช้ไปสักระยะจะเกิดอาการพิมพ์ออกไม่ครบพิมพ์เป็นเส้น เพราะหมึกในตลับจะหมด รูปแสดงบูธกันอากาศเข้าที่ตลับหมึก โดยปกติแล้วเราจะเจาะเข้าไปทางช่องกาศของตลับซึ่งจะมีตลับดำ 1 ช่อง ตลับสี 3 ช่อง ในกรณีที่หมึกออกไม่ครบเราต้องแกะสายออกและเติมหมึกลงไปประมาณ 2ml ต่อสีสำหรับสีและ 5ml สำหรับดำ โดนตำแหน่งของช่องสีให้ซับกับทิชชู่ดูตำแหน่งของสีในแต่ละช่อง หากทำการใดๆแล้วไม่หายแนะนำให้ปรึกษาช่างเพื่อหากแนวทางการแก้ปัญหาต่อไปหรือสอบถามใต้บทความนี้ได้ บทความที่เกี่ยวข้อง canon mp287 หมึกไม่ดูด,หมึกเครื่องปริ้นไม่ออก canon mp287,หมึกไหลย้อนกลับ, บทความนี้เขียนโดย http://www.general-a.net/ Solve the problem of Canon Mp287 EP1 tank with air in the tank line. First of all, I must tell you that if our printing normally does not need any correction, even if it has some air, please keep using it as it may cause problems if it is wrongly solved. From the figure above, there is air in the cartridge area with not much ink flowing back, which may be normal because the cartridge may have air inside the cartridge, so when we are not working, there may be some back when we print. Or order cleaning, the tank system will pull the ink itself. From the picture, you must check to see if the tank's air duct plug is blocked or not. If stuck, remove it, if we do not remove it, air will not print or may come out at first and the color will disappear. No color on the cable If missing the entire cable, it could be due to a booth that is connected to the cable and the cartridge is leaking. But when we do not use it, it will flow back, but the distance will be longer. Because the ink in the cartridge will run out Picture showing airtight booth at the cartridge Usually, we penetrate into the cartridge cavity, where there will be 1 black cartridge, 3 color cartridges, in case the ink is missing, we have to remove the cable and add approximately 2ml of ink for each color and 5ml for each color. Black touch the position of the color box to the tissue, look at the position of the color in each box. If any action is not lost, it is recommended to consult a technician for further solutions or inquire below this article. Related Articles How to Download and Install Canon MP287
/ Mp280 Scanner Driver Canon MP287 review / Canon MP287 review canon mp287 ink does not suck, printer ink does not come out canon mp287, ink flow back, This article was written by Http://www.general-a.net/ |