Bermad waterworks 700 series จ ดจำหน ายโดย ย เอชเอ ม

วาล์วควบคุมระบบน้ำ Bermad

รุ่น Level Control Valve ผลิตภัณฑ์ที่ได้รับการยอมรับจากทั่วโลก

Hydraulically operated control valve that controls reservoir filling and reservoir level. Reservoir filling is in response to a hydraulically controlled non-modulating bi-level vertical float that opens at a pre-set reservoir low level and shuts off drip-tight at a pre-set high level. BERMAD 700 SIGMA EN/ES series valves are hydraulic, oblique pattern, globe valves with a raised seat assembly and double chamber unitized actuator, that can be disassembled from the body as a separate integral unit. The valves hydrodynamic body is designed for unobstructed flow path and provides excellent and highly effective modulation capacity for high differential pressure applications. The valves are available in the standard configuration or with an Independent Check Feature code “2S”. The 700 SIGMA EN/ES Valves operate under difficult operation conditions with minimal cavitation and noise. They meet size and dimensions requirements of various standards เยี่ยมชมเว็บไซต์ได้ที่ www.bermad.com

Hydraulically operated control valve that controls reservoir filling and reservoir level. The valve shuts off at a pre-set reservoir high level and fully opens in response to an approximately one meter (3 ft) level drop, as sensed by the 3-Way altitude pilot mounted on the main valve. BERMAD 700 SIGMA EN/ES series valves are hydraulic, oblique pattern, globe valves with a raised seat assembly and double chamber unitized actuator, that can be disassembled from the body as a separate integral unit. The valves hydrodynamic body is designed for unobstructed flow path and provides excellent and highly effective modulation capacity for high differential pressure applications. The valves are available in the standard configuration or with an Independent Check Feature code “2S”. The 700 SIGMA EN/ES Valves operate under difficult operation conditions with minimal cavitation and noise. They meet size and dimensions requirements of various standards. เยี่ยมชมเว็บไซต์ได้ที่ www.bermad.com

Typical Installation

Typical Installation for Level Control Valve with Bi-Level Vertical Float Model 750-66

Typical Installation

Typical Installation for Level Control Valve with Altitude Pilot Model 750-80

BERMAD 700 SIGMA EN/ES series are hydraulically operated, oblique pattern control valves with high cavitation resistance, excellent flow capacity and double chamber unitized actuator, that can be disassembled from the body as a separate integral unit. The valves hydrodynamic body is designed for unobstructed flow path and provides excellent and highly effective modulation capacity for high differential pressure applications, with minimal noise and vibrations. The 700 SIGMA EN/ES series meet all flange connection standards. 700 SIGMA EN – Full port valve with extraordinarily high flow capacity enabling optimized used of resources and minimizing energy costs. 700 SIGMA ES - Designed mainly for regulating applications achieving the best performance under veriable flow velocities in pipes

Product Features & Benefits

Double-Chambered Actuator

Actuator assembly can be removed as one integral unit.
Simple on-site conversion from Single to Double chambered actuator or vice versa.

Wide Body-Oblique “Y” pattern design

Hydro-dynamically designed for efficient flow with minimal pressure loss and excellent resistance to cavitation.
Valve port area clear of obstructions; no ribs or stem guides. Increases capacity by 25% over standard globe valves.

Diaphragm Assembly

The flexible, flat fabric reinforced diaphragm is supported over the majority of its surface.
Diaphragm load is limited to only the stretching forces applied to the active area.
Diaphragm is fully protected by the separtation partition from stones, wood and debris.

Valves are suitable to work with all types of command: Hydraulic, Electric and Pneumatic.

Self operated valves that can work without an external source of power.

Wide range of options: